BURCANGIJO

The SP flash tool, is a phone flashing software designed for MediaTek smart phones e.g injoo , infinix, Tecno, HTC e.t.c.

This tool helps to update firmware, flash smartphone ROM (stock or custom), unbrick bricked smartphone and installing custom recovery on MediaTek phone.

This post will show you how to flash custom ROM using the SP flash tool on your window computer.

Thing required before flashing a custom ROM.

1. SP Flash tool - Download it Here

2. Android ADB drivers - Download it here

3. Stock or Custom Rom(a flashing software) you want to flash on your Smartphone.

Click here to get your phone ROM

Note; all phone have a different custom or stock ROM, what I mean every phone have its flashing software that works properly on it, please make sure you get the one for the phone before flashing your phone to avoid the story that touch.

Disclaimer: Dont flash another preloader and DSP_BL blocks! It is always dangerous!, as you might get you phone bricked. It is confirmed that it does not work on all device.

Legendtechny.blogspot.com is not to be held responsible when attempting this.

4. Desktop or Laptop Computer

5. USB Cable for communicating between PC and Smartphone.

How to begin.

Step 1

Disconnect you phone from your computer if connected. Switch it off and remove the battery if it is not a phone with an inbuilt battery.

Step 2

Reconnect your phone to your computer, using the USB, cable, you should see a window pop up on screen showing installation of MTK65XX Preloader Drivers,if this happens great! It simply means that you installed the MediaTek preloader correctly.

Step 3

Now! Extract the SP flash tool and lunch it on your computer.

Step 4


Locate the folder you stored the extracted file. Locate flash-tool and double click to lunch it.

Step 5


Once lunched, click on the scatter loading button.

Step 6


Locate the scatter file in the storage ROM of the phone you downloaded it to (avoid the mistake of loading a non 100% compatible ROM with your phone, this renders the phone non-bootable)

Step 7


Hit the download button on the SP flash tool to begin the flashing process.

Step 8

Connect you phone to your computer via USB. Make sure there is no battery in it but if its a phone with inbuilt battery leave the battery.


Once the flashing is complete. A circled green button will appear on your computer screen showing ...Download Ok.

Close the SP flash tool software and disconnect you phone from the computer.

...congrat you phone is flashed with the custom ROM you downloaded


If your phone bootloops, remove battery and boot to recovery mode. Factory reset you smartphone.